Isku dhufashada
0102030405
Galvanized countersunk iskutallaabta taabashada iskutallaabta
| Tilmaamaha threads | ST2.2 | ST2.9 | ST3.5 | ST4.2 | ST4.8 | ST5.5 | ST6.3 | ST8 | ST9.5 | |||
| P | Garoon | 0.8 | 1.1 | 1.3 | 1.4 | 1.6 | 1.8 | 1.8 | 2.1 | 2.1 | ||
| a | Max | 1.6 | 2.2 | 2.6 | 2.8 | 3.2 | 3.6 | 3.6 | 4.2 | 4.2 | ||
| dk | Max | 3.8 | 5.5 | 7.3 | 8.4 | 9.3 | 10.3 | 11.3 | 15.8 | 18.3 | ||
| Min | 3.5 | 5.2 | 6.9 | 8 | 8.9 | 9.9 | 10.9 | 15.4 | 17.8 | |||
| k | Max | 1.1 | 1.7 | 2.35 | 2.6 | 2.8 | 3 | 3.15 | 4.65 | 5.25 | ||
| Lambarka Slot | 0 | 1 | 2 | 2 | 2 | 3 | 3 | 4 | 4 | |||
| M1 | Cruciform | 1.9 | 3.2 | 4.4 | 4.6 | 5.2 | 6.6 | 6.8 | 8.9 | 10 | ||
| M2 | Afyare Zigzag | 2 | 3 | 4.1 | 4.4 | 4.9 | 6.3 | 6.6 | 8.8 | 9.8 | ||
| iyo | Qiimaha tixraaca | Nooca C | 2 | 2.6 | 3.2 | 3.7 | 4.3 | 5 | 6 | 7.5 | 8 | |
| Nooca F | 1.6 | 2.1 | 2.5 | 2.8 | 3.2 | 3.6 | 3.6 | 4.2 | 4.2 | |||
| Nooca R | / | / | 2.7 | 3.2 | 3.6 | 4.3 | 5 | |||||
Sida loo doorto furaha is-taajinta ku habboon
1. Ku dooro walxo: Dooro nalalka is-taabashada ee kala duwan oo ku saleysan sifooyinka walxaha loo baahan yahay in lagu dhejiyo. Tusaale ahaan, alaabta adag, dooro nalalka is-taajinta leh oo leh xoog sare, dherer ku habboon iyo dhexroor.
2. Marka loo eego xulashada dunta: Isbiilayaasha is-taajinta waxay inta badan leeyihiin laba nooc: dun adag iyo dun fiican, iyo dun kala duwan ayaa inta badan ku habboon agabyo kala duwan.
3. U dooro qaabka madaxa: Istaabadaha madaxa ee afar geesoodka ah waa ka adag yahay kan caadiga ah ee madaxa wareega ee istaabista, laakiin qiimuhu sidoo kale waa mid aad u sarreeya.