7-halaye 9-halaye anka anka aron kusa zafi-tsoma galvanized ikon hasumiya saka part M6-64 karfe tsarin walda dunƙule

Hanyar shigarwa
1. Hanyar sakawa lokaci guda: Lokacin da ake zuba kankare, toshe ƙusoshin anga. Lokacin da aka sarrafa hasumiya ta hanyar jujjuyawar, yakamata a binne kusoshi a tafi daya.
2. Hanyar ramin da aka keɓance: Kayan aiki yana wurin, ana tsaftace ramukan, ana sanya ƙullun anga a cikin ramuka, an saita kayan aikin kuma an daidaita su, sa'an nan kuma ba tare da raguwa ba, jimlar jimlar siminti ɗaya matakin sama da tushe na asali an zuba kuma a haɗa shi. Nisa daga tsakiyar kullin anga da aka binne zuwa gefen kafuwar bai kamata ya zama ƙasa da 2d (d shine diamita na ƙugiya ba), kuma kada ya zama ƙasa da 15mm (lokacin d ≤ 20, bai kamata ya zama ƙasa da 10mm ba), kuma kada ya zama ƙasa da rabin nisa na farantin anga da 50mm. Lokacin da abubuwan da ke sama ba za a iya cika su ba, ya kamata a ɗauki matakan da suka dace don ƙarfafa shi. Diamita na kusoshi na anga da aka yi amfani da su a cikin tsarin bai kamata ya zama ƙasa da 20mm ba. Lokacin da aka yi aikin girgizar ƙasa, sai a yi amfani da goro biyu don gyarawa, ko kuma a ɗauki wasu ingantattun matakai don hana sassautawa, amma a ƙara tsayin kullin angarin da kwanaki 5 idan aka kwatanta da tsayin daka a karkashin matakan da ba a girgiza ba.
Shirin shigarwa na kusoshi anka: Maganin sako-sako da kusoshi a cikin tushe. Lokacin daɗa ƙullun anga, ƙila za a iya fitar da kusoshi. A wannan lokacin, ya kamata a fara daidaita ƙullun zuwa matsayinsu na asali, kuma a yi tona harsashin da ke kewaye da kusoshi sosai. Sannan, sandunan ƙarfe masu siffa U-biyu yakamata a haɗa su a tsaye da a kwance akan kusoshi. A ƙarshe, ya kamata a tsaftace ramin da ruwa da kuma grouted. Bayan da kankare ya ƙarfafa ƙarfin ƙira, za a iya ƙarfafa karkatar da kusoshi na anka. Hanyar magani don karkatar da kusoshi na anga kusan iri ɗaya ne da na matattun kusoshi, sai dai ana iya fitar da kusoshi don magani. Idan kullin ya yi tsayi da yawa, za a iya yanke wani sashe akan kayan aikin injin kuma a sake zare shi; Idan kullin ya yi tsayi da yawa, ana iya ƙara shi ta hanyar ƙirƙira mai zafi; Idan matsayi bai dace ba, yi amfani da hanyar lanƙwasawa don gyara shi.
Aikace-aikacen masana'antu: Dace da daban-daban kayan aiki gyarawa, karfe tsarin tushe saka sassa, titi fitilu, zirga-zirga ãyõyi, famfo, tukunyar jirgi shigarwa, nauyi kayan aiki saka gyarawa, da dai sauransu